Installation San Diego, CA

At Scientificolab, we make sure your new analytical instruments hit the ground running. From unpacking to first test run, our Installation Services cover every detail so you can focus on your research.

What We Do

  • Site Survey: Review lab layout, utilities (power, gas, vacuum), and floor loading to confirm the ideal instrument location.
  • Environmental Check: Verify temperature, humidity, and vibration specs meet manufacturer guidelines.
  • Timeline Planning: Coordinate schedules with your team to minimize disruptions.
  • Utility Connection Prep: Label and test electrical outlets, gas lines, and vacuum ports.
  • Benchtop & Stand Setup: Assemble or level instrument stands and benches ahead of time.
  • Safety Clearances: Ensure clearances for airflow, door swings, and emergency egress.
  • Careful Uncrating: Remove packaging using ESD‑safe tools and dispose of materials responsibly.
  • Component Assembly: Attach detectors, autosamplers, columns, or accessories per manufacturer specs.
  • Initial Power‑On: Complete system firmware checks and confirm no transport faults.
  • Utility Hookup: Connect power, gas, vacuum, and LAN/instrument interfaces.
  • Software Installation: Load drivers, control software, and license keys on your PC or network.
  • Baseline Calibration: Run manufacturer‑recommended checks (flow‑rate, pressure, temperature) to establish a performance baseline.
  • Performance Check: Execute test runs using reference standards and document key metrics.
  • Operator Training: Walk your staff through startup, shutdown, routine maintenance, and troubleshooting tips.
  • Service Report: Provide a detailed installation report, including photos, serial numbers, and calibration data.

Why Choose Our Installation?

Smooth Startup: Reduce weeks of setup headaches to just a few hours.

Tailored Workflow: We adapt to your lab’s protocols and scheduling needs.

Peace of Mind: Certified technicians ensure your instrument performs to spec from day one.

Ready to get started? Contact ScientifiCo today to schedule your installation and make sure your lab is up and running without a hitch!

Frequently Asked Questions

Yes. After we unpack, assemble, and connect utilities to your new instrument, we provide your staff with basic operational training. This covers startup, shutdown, routine maintenance, and software familiarization.
Yes. During installation, we install necessary drivers, control software, and establish LAN/instrument interfaces so your new equipment communicates seamlessly with your existing data systems.

Contact us

    Phone: +1 (619) 666-6220
    Email: info@scientificolab.com
    Address: 8535 Arjons Dr Suite M San Diego, CA 92126
    Hours: Mon-Fri: 9am – 6pm

    Generic selectors
    Exact matches only
    Search in title
    Search in content
    Post Type Selectors
    No products in the cart.