No products in the cart.
Phone:
+1 (619) 666-6220
Location:
San Diego, CA
Mon - Fri:
9.00am - 6.00pm
Email:
info@scientificolab.com
At Scientificolab, our Operation Qualification service confirms that your instruments perform consistently and reliably under normal and challenge conditions—fully tested, documented, and ready for routine use.
Once IQ is complete, the next phase is OQ, which confirms that your equipment operates correctly under its normal process settings. Typically performed as part of your scheduled quality‑assurance checks, OQ tests critical functions—such as temperature control, pressure regulation, and timing mechanisms—to catch any issues before you start production.

Agilent HP 1100 G1315A , Agilent 1100 Series ALS Thermostat with WPALS Autosampler....

Waters 2487 Main, Waters 2487 Main PCB (WAS081060), Waters “HPLC with UV Standards Kit”.....

Hamilton OxyFerm Plus PHI VP 425, Hamilton OxyFerm FDA VP 325 Dissolved Oxygen Sensor Probe...
in about 2 days
Verify system performance under standard operating parameters.
Confirm the equipment delivers consistent, reproducible results.
Push the system to its defined extremes (e.g., highest flow or temperature) to establish safe operational limits.
Ensure all measured values fall within predefined criteria.
This structured stage follows a detailed OQ protocol, uses a step‑by‑step test checklist, and ends with a comprehensive OQ report. It also defines the Standard Operating Procedures (SOPs) for routine use and maintenance—making sure your equipment stays within its qualified operating window throughout its lifecycle.
Contact us
Phone: +1 (619) 666-6220
Email: info@scientificolab.com
Address: 8535 Arjons Dr Suite M San Diego, CA 92126
Hours: Mon-Fri: 9am – 6pm
