Preventive Maintenance - ScientifiCo Lab

Preventive Maintenance San Diego, CA

At ScientifiCo, our Preventive Maintenance (PM) program is designed to keep your analytical instruments performing at peak efficiency, minimize unplanned downtime, and extend equipment lifespan. By proactively addressing wear-and-tear before it becomes a critical failure, we help you maintain data consistency, meet regulatory requirements, and optimize return on investment.

supported brands and models

typical problems:

deadlines and results

in about 2 days

Our Approach

1. Comprehensive Inspection

Electrical checks (power supplies, grounding, signal integrity)
Mechanical assessments (pumps, valves, seals, bearings)
Fluidic system review (tubing, filters, flow cells)

2. Precision Cleaning & Calibration

Ultrasonic or solvent cleaning of critical components
Flow-rate and pressure verification against manufacturer specs
Detector performance checks (baseline noise, drift, sensitivity)

3. Component Replacement & Adjustment

OEM filter and seal swaps (e.g., sheath filters on flow cytometers, frits on HPLCs)
Pump head re‑lubrication or rebuild
Software and firmware updates to ensure compatibility and security

4. Performance Validation

Run standardized test protocols with reference standards
Document key metrics (retention time, peak symmetry, signal‐to‐noise)
Troubleshoot any deviations immediately

Key Benefits

Maximized Uptime: Scheduled visits prevent emergency repairs and laboratory interruptions.

Consistent Data Quality: Routine calibration and validation safeguard against drift and variability.

Regulatory Compliance: Detailed service reports support GLP/GMP audit trails.

Cost Savings: Early detection of aging parts reduces expensive emergency repairs.

Recommended Schedule

We typically recommend a full PM every 6–12 months, tailored to instrument usage and criticality. High‑throughput labs may benefit from quarterly visits, while moderate‑use systems can often maintain performance on a biannual cycle.

Ready to Protect Your Investment?

Contact ScientifiCo today to customize a Preventive Maintenance plan that fits your workflow and budget.

Testimonials

They have cultivated a loyal following of functional and integrative medicine professionals, unified by a desire to prevent disease and attain health. They alued partners in providing only high quality testing to help us achieve clinical results faster in partnership with our patients.

John Peter

OptimeInc

My 3 year old severely struggled with constipation! I was stumped - she already didn't eat gluten, sugar or dairy & she was on supplements for gut motility even restoralax but we were not getting to the root of the problem, we did the FST test to find out she was sensitive to egg.

Johny Star

Koira Ind

About 4 years ago I was experiencing extreme eczema on my face including my eyelids. I excluded wheat and dairy and it got better. Since then I have still not felt quite right even after switching to a basically Keto way. I used the 200+ food sensitivity test and found out many other.

Anna Pary

Eteon Labs

My naturopath suggested elimination testing or your IgG test. For me it was a no brainer. I didn't want to spend any more time winging it. I wanted clear results. I got those results in a timely manner and together my naturopath and I have made a plan and my health is back on track.

Diana Castle

Optime Labs

I was so down everything hurt which wasn't considered normal for a woman my age. I went to my first naturopath and she had me tested for food sensitivities. We thought for sure It was going to come back with wheat, dairy or chocolate gladly I am fine with those!!!

Marian Chris

Sanera Labs

What I am sensitive to is cranberries, bananas, broccoli and almonds amongst other things. My naturopath asked if I used almond milk and I had, daily in my smoothie!! I switched to cashew and coconut milk and cut out other items that I scored sensitive to.

Chris Wensel

Promina Labs

Anna Mudson

Lab Operations

Maria Andaloro

HR Officer

Frequently Asked Questions

Have questions about our laboratory services, processes, or compliance standards?
Our FAQ section covers the essentials to help you understand how we work and what you can expect.
Still curious? We’re here to help.

What types of lab equipment do you repair?

We specialize in repairing a wide range of laboratory equipment including centrifuges, spectrophotometers, incubators, autoclaves, shakers, and more. If you’re unsure whether we service your equipment, feel free to contact us.

Do you offer on-site repairs or only in-house services?

We offer both on-site and in-house repair services, depending on the type and condition of the equipment. Our technicians will assess the situation and recommend the most efficient option.

How long does a typical repair take?

Turnaround times vary depending on the issue and availability of parts. Minor repairs may be completed within 24–72 hours, while more complex jobs could take longer. We strive to minimize downtime for your lab.

Are your technicians certified or trained for specific brands?

Yes, our technicians are highly trained and experienced with a variety of major lab equipment brands. We continuously update our training to keep up with new models and technologies.

What is your service area?

We serve San Diego County and Surrounding ares. If you're outside our standard service zone, please contact us—we may still be able to help.

Do you provide maintenance contracts or preventative service plans?

Absolutely. We offer customizable preventative maintenance plans to keep your equipment in optimal working condition and reduce the risk of unexpected failures.

Phone: +1 (619) 666-6220
Email: info@scientificolab.com
Address: 8535 Arjons Dr Suite M San Diego, CA 92126
Hours: Mon-Fri: 9am – 6pm