English No products in the cart.
Phone:
+1 (619) 666-6220
Location:
San Diego, CA
Mon - Fri:
9.00am - 6.00pm
Email:
info@scientificolab.com
Phone:
+1 (619) 666-6220
Email:
info@scientificolab.com
Installation San Diego, CA
At Scientificolab, we make sure your new analytical instruments hit the ground running. From unpacking to first test run, our Installation Services cover every detail so you can focus on your research.
supported brands and models
Agilent Technologies
Agilent HP 1100 G1315A , Agilent 1100 Series ALS Thermostat with WPALS Autosampler....
Waters Corporation
Waters 2487 Main, Waters 2487 Main PCB (WAS081060), Waters “HPLC with UV Standards Kit”.....
Hamilton
Hamilton OxyFerm Plus PHI VP 425, Hamilton OxyFerm FDA VP 325 Dissolved Oxygen Sensor Probe...
typical problems:
- 1. no problems
- 2. no problems
- 3. no problems
deadlines and results
in about 2 days
What We Do
1. Pre‑Installation Assessment
- Site Survey: Review lab layout, utilities (power, gas, vacuum), and floor loading to confirm the ideal instrument location.
- Environmental Check: Verify temperature, humidity, and vibration specs meet manufacturer guidelines.
- Timeline Planning: Coordinate schedules with your team to minimize disruptions.
2. Site Preparation
- Utility Connection Prep: Label and test electrical outlets, gas lines, and vacuum ports.
- Benchtop & Stand Setup: Assemble or level instrument stands and benches ahead of time.
- Safety Clearances: Ensure clearances for airflow, door swings, and emergency egress.
3. Equipment Unpacking & Setup
- Careful Uncrating: Remove packaging using ESD‑safe tools and dispose of materials responsibly.
- Component Assembly: Attach detectors, autosamplers, columns, or accessories per manufacturer specs.
- Initial Power‑On: Complete system firmware checks and confirm no transport faults.
4. System Integration & Calibration
- Utility Hookup: Connect power, gas, vacuum, and LAN/instrument interfaces.
- Software Installation: Load drivers, control software, and license keys on your PC or network.
- Baseline Calibration: Run manufacturer‑recommended checks (flow‑rate, pressure, temperature) to establish a performance baseline.
5. Final Validation & Handoff
- Performance Check: Execute test runs using reference standards and document key metrics.
- Operator Training: Walk your staff through startup, shutdown, routine maintenance, and troubleshooting tips.
- Service Report: Provide a detailed installation report, including photos, serial numbers, and calibration data.
Why Choose Our Installation?
Smooth Startup: Reduce weeks of setup headaches to just a few hours.
Tailored Workflow: We adapt to your lab’s protocols and scheduling needs.
Peace of Mind: Certified technicians ensure your instrument performs to spec from day one.
Ready to get started? Contact Scientificolab today to schedule your installation and make sure your lab is up and running without a hitch!
Testimonials
They have cultivated a loyal following of functional and integrative medicine professionals, unified by a desire to prevent disease and attain health. They alued partners in providing only high quality testing to help us achieve clinical results faster in partnership with our patients.
OptimeInc
My 3 year old severely struggled with constipation! I was stumped - she already didn't eat gluten, sugar or dairy & she was on supplements for gut motility even restoralax but we were not getting to the root of the problem, we did the FST test to find out she was sensitive to egg.
Koira Ind
About 4 years ago I was experiencing extreme eczema on my face including my eyelids. I excluded wheat and dairy and it got better. Since then I have still not felt quite right even after switching to a basically Keto way. I used the 200+ food sensitivity test and found out many other.
Eteon Labs
My naturopath suggested elimination testing or your IgG test. For me it was a no brainer. I didn't want to spend any more time winging it. I wanted clear results. I got those results in a timely manner and together my naturopath and I have made a plan and my health is back on track.
Optime Labs
I was so down everything hurt which wasn't considered normal for a woman my age. I went to my first naturopath and she had me tested for food sensitivities. We thought for sure It was going to come back with wheat, dairy or chocolate gladly I am fine with those!!!
Sanera Labs
What I am sensitive to is cranberries, bananas, broccoli and almonds amongst other things. My naturopath asked if I used almond milk and I had, daily in my smoothie!! I switched to cashew and coconut milk and cut out other items that I scored sensitive to.
Promina Labs
They have cultivated a loyal following of functional and integrative medicine professionals, unified by a desire to prevent disease and attain health. They alued partners in providing only high quality testing to help us achieve clinical results faster in partnership with our patients.
Lab Operations
My 3 year old severely struggled with constipation! I was stumped - she already didn't eat gluten, sugar or dairy & she was on supplements for gut motility even restoralax but we were not getting to the root of the problem, we did the FST test to find out she was sensitive to egg.
HR Officer
Frequently Asked Questions
Have questions about our laboratory services, processes, or compliance standards?
Our FAQ section covers the essentials to help you understand how we work and what you can expect.
Still curious? We’re here to help.
Our FAQ section covers the essentials to help you understand how we work and what you can expect.
Still curious? We’re here to help.
We specialize in repairing a wide range of laboratory equipment including centrifuges, spectrophotometers, incubators, autoclaves, shakers, and more. If you’re unsure whether we service your equipment, feel free to contact us.
We offer both on-site and in-house repair services, depending on the type and condition of the equipment. Our technicians will assess the situation and recommend the most efficient option.
Turnaround times vary depending on the issue and availability of parts. Minor repairs may be completed within 24–72 hours, while more complex jobs could take longer. We strive to minimize downtime for your lab.
Yes, our technicians are highly trained and experienced with a variety of major lab equipment brands. We continuously update our training to keep up with new models and technologies.
We serve San Diego County and Surrounding ares. If you're outside our standard service zone, please contact us—we may still be able to help.
Absolutely. We offer customizable preventative maintenance plans to keep your equipment in optimal working condition and reduce the risk of unexpected failures.
Contact us
Phone: +1 (619) 666-6220
Email: info@scientificolab.com
Address: 8535 Arjons Dr Suite M San Diego, CA 92126
Hours: Mon-Fri: 9am – 6pm